Alpine
 65 - 75 - 85 STD - GT
SPEED FIVE - POWER SHUTTLE
CAB
 CLICK ON PHOTO TO ENLARGE =>
 

Alpine: powerful, lightweight
and versatile to suit your needs

The Alpine series completes the new Landini tractor range with a powerful, lightweight and versatile tractor designed to meet the demand for high productivity in the low-power range (69 to 81.5 HP ISO).
The Alpine series comes in two versions - Standard and GT - and in a choice of three four-wheel drive models - 65, 75 and 85 – equipped with either platform or cab.

The Alpine STD version features drop-down final drives and a specially-built 4WD front axle with integral braking system allowing the use of large-diameter rear tires of up to 36”.

These features make the Alpine STD tractor ideally suited for soil preparation activities - such as plowing, tillage and harrowing, as well as for forage harvesting where the tractor maneuverability comes in handy. Thanks to its versatile transmission designed to provide a maximum speed of 25 mph (40 kph), the Alpine STD is equally at home on road.

The Alpine GT version features a 4WD front axle with integral braking system and straight epicyclic final drives, which make this tractor narrower and lower by about 2,36 in. (60 mm) than the Standard model, thus improving the centre of gravity for increased stability.

This design, combined with the adoption of 28-inch rear tires, makes the Alpine GT tractor ideally suited for hill and mountain work, as well as for haymaking and for use in large orchards.

All models are powered with the new “Euro2/Tier2” Perkins 804C-33T series direct-injection turbo engines. With a total displacement of 203 cu. in. (3331 cm3), the new engines deliver superior performance in terms of horsepower, torque and torque backup.

The modular transmission is available in two versions – mechanical (Speed Five) and electro hydraulic (Power Five) - and equipped with Declutch Control and Reverse Power Shuttle.

To improve headland maneuvering, especially when working between rows, Landini has adopted a unique system named Fast-Run, which reduces the steering angle while bringing down the steering time by 30% for greater maneuverability and enhanced productivity.

 CLICK PHOTOS TO ENLARGE











CLICK PHOTOS TO ENLARGE
The Twin-Lock system, allowing simultaneous lock of rear and front differentials, is hydraulically engaged by button. The hydraulic system features four auxiliary valves for maximum versatility, while the use of a hydraulic PTO enhances the implement performance. The power lift is available in either electronic or mechanical version and provides a maximum lifting capacity of 7480 lb. (3400 kg).

The tractor excellent performance and functionality are enhanced by the comfort of the “Total View” cab featuring all-glass side doors hinged onto the rear post for all-round visibility. The air-conditioning installed on the cab roof, the new digital instrument panel and the intuitive controls arranged in ergonomic position maximize the driving comfort.
The plunging line of the hood makes for improved cab visibility.


 

 New Perkins 800 series engines for superior performance
All models are equipped with the new “ Euro2/ Tier2 ” Perkins 804C-33T series direct-injection turbo engines. With a total displacement of 203 cu. in. (3331 cm3) and powers of 69, 76 and 81.5 hp (ISO), the new engines deliver superior performance in terms of horsepower, torque and torque backup.

The forward tilting hood provides easy access to the engine for routine service and maintenance (fig. A).
<< CLICK ON PHOTO TO ENLARGE

 CLICK  PHOTO TO ENLARGE		 With the “Fast-Run” system and a 60° steering angle maneuvering is great fun
The innovative four-wheel drive front axles allow a steering angle of 60° for maximum maneuverability. To improve headland maneuvering, especially when working between rows, Landini has adopted a unique system named FAST-RUN (standard on GT model), featuring a wet multidisc dual clutch. One clutch is used to engage
the four-wheel drive, whilst the other allows the turning speed of the front wheels to be increased by 78% when the steering angle exceeds 35°.
This decreases the steering time by 30% while reducing the turning radius for better  manoeuvrability and enhanced productivity (fig. B).

CLICK  PHOTO TO ENLARGE		 Power Five transmission: electronics makes the difference
The Power Shuttle transmission includes Speed Five base transmission, Creeper, Power Five transmission (HI-LO splitter gear with electro-hydraulic engagement for 20% speed reduction) and Reverse Power Shuttle (hydraulic reverse shuttle with lever integrated in the  steering column) providing a total of 60FWD +  60REV speeds. Combining the Declutch Control (fig. D) (orange pushbutton integrated in the gear lever for electro-hydraulic engagement of the transmission clutch) with the Reverse Power Shuttle (fig. C), this type of transmission allows engaging and reversing all gears without using the clutch pedal.

CLICK  PHOTO TO ENLARGE		 Hydra P.T.O.: pto with multi-disc clutch and electro-hydraulic engagement  - The PTO provides two speeds - 540/750 rpm (standard) and  540/1000 rpm (optional) plus a ground speed for the use of trailers (fig. G).
A multi-disc wet clutch operated by an electro-hydraulic pushbutton integrated on the console placed on the driver’s right enables smooth and progressive engagement of the PTO (fig. E).
Hydraulics designed for maximum versatility - The Alpine tractor features an extremely versatile hydraulic system consisting of two separate circuits. One circuit depends on a pump with a delivery of 7,2 GPM (27.5 l/min) to operate the steering system and all electro-hydraulic functions for control of  transmission.
The other circuit provides oil for the lift system and the rear auxiliary valves and is powered by a pump delivering 15 GPM (57 l/min). A choice of four auxiliary valves is available on request to suit different application needs (fig. F): simple-acting valves for dump trailers, double acting valves for reversible plows and valves with a floating position allowing work implements to follow the ground profile.
CLICK  PHOTO TO  ENLARGE
 		Mechanical power lift: simple and accurate  - The mechanical power lift is controlled by two levers located on the console placed on the driver’s right, allowing for selection of the main functions such as draft and position control, intermix, lift rising and lowering (fig. H).
The lift lowering function is used also as a hydraulic lock for road transport. The Cat. II three-point linkage with two auxiliary cylinders is extremely rugged and equipped with quick-couplings to provide a maximum lifting capacity of 7480 lb. (3400 kg) (fig. G).

CLICK  PHOTO TO  ENLARGE		 “Total View” cab for all-round visibility - The most outstanding feature of the Alpine tractor is the all-round visibility of the “Total View” cab provided by the all-glass side doors hinged onto the rear post. The interiors, stylish and accurately finished, are largely made using the modern composite materials of automotive design. All controls are arranged in a comfortable and intuitive position,  according to current ergonomic standards.
The adjustable seat, the new digital instrument panel and the steering wheel adjustable in height and inclination further improve the driving comfort. The heating/ventilation and air-conditioning system is installed on the cab roof with considerable benefits for the driver in terms of comfort, safety and health.

The ventilation system is integrated by two filters designed to purify the air inside the cab. If the operator is required to work in a pesticide  contaminated environment, cab can be provided with activated  carbon filters, available on request. The roof features a fixed clear sunroof, particularly useful when working with front loaders, and four lights for night work. Natural ventilation is ensured by the openable front and rear windscreens (fig. I).